Return To External Gallery Next by date Next External Cylinder
Dale Detrich Attica, OH firstname.lastname@example.org
I was looking through the gallery and saw your stirling engine, so I went down and dusted off one of mine.. This engine was the second stirling cycle engine that I built.. It is a scratch built design, using a .625 power cylinder X .750 stroke.. The displacer piston is a 1.000" X .750 stroke.. The engine is fairly fast with an estimated speed of aprox. ( I need a tach ) 3000 rpm.. The alcohol reserve is built into the base.
I will send you several pictures and you can make your pick of what you want. I had it running while I took some of the pictures, you can see the flame. but the camera was too fast to see any motion...
Copyright 2002, Florida Association of Model Engineers and engine builder as noted above, All rights reserved.