Return To Multi Cylinder Gallery 

 

Peter Pereszlenyi,     Bratislava, Slovakia    pereszlenyi@szm.sk          1/15/2004

This engine is not my own desing. It is downloadet from Yahoos group STEAMENGINEPRINTS
(cool new plans)I have made some small changes.Materials used are : Basic skelet ,Cylinderhead ,Flywheel ,Bevel gears and conecting rods are brass ,Cylinders are castiron ,Pistons are DURAL (Aluminiumalloy),there are no piston rings .Piston pin (3mm),Crak pin (4mm)and main shaft (6mm) are bearing neadlees.Crankshaft runs on small neadle bearings.

               

   

 

Copyright 2004,  Florida Association of Model Engineers and engine builder as noted above, All rights reserved.